Flat face
STS4 1×4
A flat face with a slim groove at each joint. It is the narrower of the two STS4 sizes on this page.
- Actual size
- 0.59 × 3.54 in
- Covering width
- 3.15 in
Launch the full SaunaDesignPro workspace
Pick a profile.
Open the room.
Choose a thermo-aspen face below. Each link opens SaunaDesignPro with that material already selected, ready for room dimensions, benches, heater, openings, and ventilation.
Flat face, wider board
STS4 1×5
The same flat STS4 face on a wider board, so a wall shows about 27% fewer joints than with the 1×4.
- Actual size
- 0.59 × 4.72 in
- Covering width
- 4.33 in
Stepped face
STEP 5/4×3
A thicker board with a stepped face. Each joint forms a square step that casts a shadow line.
- Actual size
- 1.06 × 2.52 in
- Covering width
- 2.20 in
Ribbed face
KYTE 1×4
Raised ribs with narrow grooves between them run the length of each board.
- Actual size
- 0.59 × 3.43 in
- Covering width
- 3.15 in
Sawtooth face
VIRE 1×4
Angled facets run the length of each board in a sawtooth pattern.
- Actual size
- 0.59 × 3.50 in
- Covering width
- 3.11 in
The images show the shape of each face, not exact color. Thermory notes that each piece of wood differs in appearance and that shade can vary slightly between production batches, so see a sample before you order. Thermory catalog, p. 8 Thermory USA guide, p. 2
Need to compare first?
See every profile side by side.
Compare actual sizes, covering widths, linear feet per square foot, and room photos before you commit the room.
Compare thermo-aspen profilesReady to source?
Buy through Sauna Marketplace.
Check current prices, lengths, sample options, availability, shipping terms, and matching bench and trim material.